With conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state. To overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.
Derived from the FOX's original ATS stabilizer, the TS stabilizer utilizes a Through Shaft (TS) architecture that eliminates shaft fluid displacement throughout the stabilizer's entire travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback. The result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer.
Jeep JK / JL / JT Applications:
| Application | Fox Part Number | Clamp Size | Collapsed Length | Extended Length | Travel |
|---|---|---|---|---|---|
| JK Stock Tie Rod | 985-02-121 | 1-3/8" | 15.08" | 23.19" | 8.12" |
| JK Synergy Tie Rod | 985-02-128 | 1-1/2" | 15.08" | 23.17" | 8.1" |
| JK Aftermarket Tie Rod | 985-02-122 | 1-5/8" | 15.08" | 23.17" | 8.1" |
| JL / JT Stock axle mount position | 985-02-127 | N/A | 15.026" | 23.22" | 8.194" |
| JL / JT Synergy Tie Rod in Flipped Position | 985-02-128 | 1-1/2" | 15.08" | 23.17" | 8.1" |
| JL / JT Aftermarket Tie Rod in Flipped Position | 985-02-122 | 1-5/8" | 15.08" | 23.17" | 8.1" |
Dodge Ram 1500 / 2500 / 3500 Applications:
| Application | Fox Part Number | Clamp Size | Collapsed Length | Extended Length | Travel |
|---|---|---|---|---|---|
| 2009-2013 Ram Stock Tie Rod | 985-02-122 | 1-5/8" | 15.08" | 23.17" | 8.1" |
| 1994-2013 Ram Synergy Tie Rod | 985-02-128 | 1-1/2" | 15.08" | 23.17" | 8.1" |
| 2014+ Ram Stock Tie Rod | 985-02-135 | N/A | 15.08" | 23.27" | 8.19" |
|
2014+ Ram Synergy Tie Rod* Requires use of 4050-75 |
985-02-135 | N/A | 15.08" | 23.27" | 8.19" |
*When running a dual stabilizer configuration you can use any Fox TS stabilizers with (2) Synergy TS clamp Adapters 4051-01
Ford Super Duty F-250 / F-350 Applications:
| Application | Fox Part Number | Clamp Size | Collapsed Length | Extended Length | Travel |
|---|---|---|---|---|---|
| 2005+ Stock Drag Link | 985-02-132 |
1-125" | 15.08" | 23.17" | 8.1" |
| 2005+ Synergy Drag Link | 985-02-128 | 1-1/2 | 15.08" | 23.17" | 8.1" |